Catalytic System Research Articles

Core@paratroopers Nanoassemblies with Catalytic Cascade for Efficient Tumor Starvation Therapy

AbstractThe catalytic therapy based on the nanozymes has received increasing interest in cancer treatment. However, the catalytic capabilities of standalone nanozymes are relatively limited, necessitating the development of a nano‐bio composite system that integrates both nanozymes and natural enzymes. This construction often inevitably leads to interference between natural enzyme and nanozymes, resulting in reduced synergistic performance. Herein, a cascade catalysis system featuring the “core@paratroopers” structure is proposed, wherein hollow manganese dioxide (HMnO2) serves as “core” and ultra‐small hybrid single‐micelle (H‐micelle) encapsulated with glucose oxidase (GOx) as “paratroopers” (H‐micelle‐GOx). The outer SiO2 layer of the H‐micelle can effectively protect the GOx. Under hypoxic conditions, HMnO2 reacts with endogenous H2O2 to produce O2, thereby enhancing the catalytic efficiency of GOx for starvation therapy. Simultaneously, the generated H2O2 boosts the catalytic efficiency of HMnO2, accelerating local O2 generation and alleviating tumor hypoxia. Additionally, this system exhibits rapid degradation in the tumor microenvironment characterized by high glutathione (GSH) expression, facilitating the release and deep penetration of the ultra‐small H‐micelle‐GOx “paratroopers” within the solid tumor.

Transfer Hydrogenation of Vinyl Arenes and Aryl Acetylenes with Ammonia Borane Catalyzed by Schiff Base Cobalt(II) Complexes

A series of bench-stable Co(II) complexes containing hydrazone Schiff base ligands were evaluated in terms of their activity and selectivity in carbon-carbon multiple bond transfer hydrogenation. These cobalt complexes, especially a Co(II) precatalyst bearing pyridine-2-yl-N(Me)N=C-(1-methyl)imidazole-2-yl ligand, activated by LiHBEt3, were successfully used in the transfer hydrogenation of substituted styrenes and phenylacetylenes with ammonia borane as a hydrogen source. Key advantages of the reported catalytic system include mild reaction conditions, high selectivity and tolerance to functional groups of substrates.

Transient in situ DRIFTS investigation of CO2 hydrogenation to methanol over unsupported CuGa catalysts

Gallium oxide‐based catalysts are promising candidates for CO2 hydrogenation to methanol, whilst mechanistic understanding of the catalytic systems is not yet fully understood. Here, transient in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) studies of CO2 hydrogenation over the unsupported CuGa and CuGaN (with N doping) catalysts were conducted. The findings show that N doping could possibly promote the formation of surface Cu+ sites on the interface between Cu and Ga2O3, and hence increasing the selectivity to methanol. However, N doping prohibited the reduction of Ga2O3 to oxygen‐deficient Ga2O3‐x, which is unfavorable for CO2 conversion. Additionally, during DRIFTS the steady‐state isotope transient kinetic analysis (SSITKA) was performed (under H2/D2 isotopic switching conditions). The SSITKA results confirm that the Cu+‐bound formates were likely the key intermediates for methanol synthesis over the catalyst, and the N doping could also weak the interaction between CO* species and the catalyst surface, and thus facilitating the selectivity towards methanol rather than CO. Findings of the work show that the partial nitridation of the metal oxides could be the strategy to promote methanol synthesis selectivity.

Halogen‐Atom Transfer Enabled Catalytic Enantioselective Coupling to Chiral Trifluoromethylated Alkynes via Dual Nickel and Photocatalysis

With halogen‐atom transfer as an effective tool, a novel catalytic enantioselective protocol to generate chiral trifluoromethylated alkynes has been established by a cooperative photoredox and nickel catalysis system, providing a straightforward and modular route to access this type of product in good yields and enantioselectivities. The halogen‐atom transfer process is essential for the reaction and this novel strategy offers another promising way to utilize alkyl halides with highly negative reduction potentials. It firstly expands nickel‐catalyzed asymmetric reductive cross‐couplings of organohalides from the traditional single‐electron transfer to halogen‐atom transfer.

Halogen-Atom Transfer Enabled Catalytic Enantioselective Coupling to Chiral Trifluoromethylated Alkynes via Dual Nickel and Photocatalysis.

With halogen-atom transfer as an effective tool, a novel catalytic enantioselective protocol to generate chiral trifluoromethylated alkynes has been established by a cooperative photoredox and nickel catalysis system, providing a straightforward and modular route to access this type of product in good yields and enantioselectivities. The halogen-atom transfer process is essential for the reaction and this novel strategy offers another promising way to utilize alkyl halides with highly negative reduction potentials. It firstly expands nickel-catalyzed asymmetric reductive cross-couplings of organohalides from the traditional single-electron transfer to halogen-atom transfer.

Cascade synthesis of D-phenyllactic acid using amorphous metal-organic framework-modified Escherichia coli

D-phenyllactic acid is an important medical intermediate and a potential green preservative. Due to its extensive use and high demand, there has been significant research interest in developing efficient synthesis methods. In this study, we aimed to efficiently produce D-phenyllactic acid from L-phenylalanine through a two-step cascade reaction using a coupled catalytic system consisting of two bacteria strains (E. coli/pET28a-lrldh and E. coli/pET28a-ladd2). To enhance the stability of this catalytic system, we encapsulated the two recombinant E. coli strains with amorphous ZIF-90, which was thoroughly characterized using various methods including SEM, FT-IR, TGA, XRD, XPS, and CLSM analysis. Compared to free cells, the immobilized living materials (amorphous ZIF-90@E. coli) showed good stability in harsh environments and superior recyclability. When applied to the production of D-PLA, the amorphous ZIF-90@E. coli system achieved a yield of 9.00 g/L and a conversion of 89.4 %. This successful coupling catalysis from L-phenylalanine to D-PLA indicates the potential of aZIF-90@E. coli for biosynthesis of D-phenyllactic acid in future industrial applications.

Recent Development in Synthesis of N‐Methylamines with Amines and Methanol

AbstractThe N‐methylation reaction of amines with methanol via the borrowing‐hydrogen strategy is an important method for the construction of C−N bonds. Compared with other C1 sources, such as toxic formaldehyde or expensive formic acid, methanol is more suitable for N‐methylation reactions due to its eco‐friendliness and low price. Using this strategy, various types N‐methylated products, including biological and pharmaceutical molecules have been prepared. Here, we present a thorough survey of decades of articles showing current developments in N‐methylation reactions with methanol. We discuss homogenous, heterogenous and light‐driven catalytic systems for both N‐methylation and N,N‐dimethylation reactions. This review presents the shortcomings of current developments and provides future development progress in N‐methylation reactions with methanol.

Microkinetic Model as a Crucial Tool for Understanding Homogeneous Catalysis

Microkinetic modeling is a computational tool that allows simulating the evolution of the concentration of catalytically relevant species with time, providing a description of the catalytic system closer to the experimental. Microkinetic models have been mainly applied in organometallic catalysis as a means for validating mechanistic proposals by comparing experimental and computed rates and concentrations at a given time. However, this tool becomes very useful when studying complicated reaction mechanisms, aiding in identifying the catalyst resting state, optimizing reaction conditions or improving the catalyst design. In this Concept, we focus on these applications of microkinetic modeling through the discussion of some selected examples. In addition, we also point out some of the challenges and limitations we may face when building microkinetic models, which may explain why they are still underused.

Near-Infrared Catalytic Chemiluminescence System based on Zinc Gallate Nanoprobe for Hydrazine Sensing.

To the deep tissue penetration and ultra-low background, developing near-infrared (NIR) chemiluminescence probes for human health and environmental safety has attracted more and more attention, but it remains a huge challenge. Herein, a novel NIR chemiluminescence (CL) system was rationally designed and developed, utilizing Cr3+-activated ZnGa2O4 (ZGC) nanoparticles as a catalytic luminophore via hypochlorite (NaClO) activation for poisonous target (hydrazine, N2H4) detection. With superior optical performance and unique catalytic structure of ZGC nanoparticles, the fabricated ZGC-NaClO-N2H4 CL system successfully demonstrated excellent NIR emission centered at 700 nm, fast response, and high sensibility (limit of detection down to 0.0126 μM). Further experimental studies and theoretical calculations found the cooperative catalytic chemiluminescence resonance energy transfer mechanism in the ZGC-NaClO-N2H4 system. Remarkably, the ZGC-based NIR CL system was further employed for N2H4 detection in a complicated matrix involving bioimaging and real water samples, thereby opening a new way as a highly reliable and accurate tool in biomedical and environmental monitoring applications.

Impact of ceria support morphology on Au single‐atom catalysts for benzyl alcohol selective oxidation

Alcohol oxidations are a key industrial chemical transformation, with aldehydes and ketones finding use in an array of applications. Nobel metals are known for their activity towards this chemoselective transformation, however, sustainable catalyst synthesis requires optimal utilisation of these scarce elements. Here, we report Au catalytic systems based on the deposition of isolated Au sites on different morphologies of ceria in which different surface facets of the support are exposed. Through tailoring the support morphology and from extensive catalyst characterisation, it is shown that the exposed facet is critical for controlling the formation (or not) of isolated Au sites.  Both the 110 and 111 facets are capable of this feat, yielding single‐atom sites for rod, octahedron, and polyhedron morphologies. In contrast, the 100 facet is not, resulting in Au nanoparticles on cubic ceria.  This dictation over Au species is critical to benzyl alcohol oxidation capacity at mild conditions and in the absence of a soluble base, with only single‐atom catalyst (SAC) systems demonstrating activity. Furthermore, the exposed surface facet also governs the degree of surface oxygen vacancies, which is critical to catalyst activity and arises from its control over substrate adsorption strength, as revealed through T1/T2 NMR relaxation measurements.

Ligand‐promoted dehydrogenative coupling of γ‐/β‐amino alcohols with ketones to N‐heterocycles via molybdenum catalysts

Molybdenum‐based efficient and broadly applicable catalytic system is presented for the dehydrogenative coupling of γ‐/β‐amino alcohols with ketones. In particular, complex Mo(CO)6 in combination with Xantphos and t‐BuOK as base provides direct synthesis of structurally diverse quinoline, pyridine, and pyrrole compounds (total 55 examples) with isolated yields up to 92%. Low catalyst loading, cost‐effective, and high catalytic activities with high tolerance to stand with diverse functional groups are additional features of these molybdenum catalysts exhibiting high efficacy to replace the precious metal catalysts such as ruthenium and iridium. Furthermore, the DFT and experimental studies were explored for the reaction mechanism which can assist in broadening the scope of the molybdenum catalysts for different transformation reactions.

Optimizing light-driven ene-reductase reactions with g-C3N4 and electron mediators

In the realm of green chemistry and sustainable industrial processes, the integration of enzymes with photocatalytic materials offers a promising avenue for achieving efficient, light-driven catalysis while minimizing environmental impact. This study introduces an enzyme-photo-coupled catalytic system (EPCS) using graphitic carbon nitride (g-C3N4) as a photocatalyst and methyl viologen (MV2+) as an electron mediator to drive the reduction of 2-cyclohexen-1-one by the Old Yellow Enzyme (OYE), reducing the reliance on expensive and scarce bioelectronic carriers and demonstrating a sustainable alternative for biocatalytic applications. Furthermore, we explored the incorporation of a Pickering emulsion system to enhance mass transfer, especially in reactions involving highly concentrated substrates. This adaptation not only improves the yield of the EPCS at higher substrate concentrations but also offers a scalable and environmentally benign alternative to traditional photocatalytic systems.

Photocatalytic CO2 Reduction Using Mixed Catalytic Systems Comprising an Iron Cation with Bulky Phenanthroline Ligands.

This study reports on efficient photocatalytic CO2 reduction reactions using mixed catalytic systems of an Fe ion source and various 1,10-phenanthroline derivatives (R1R2p) as ligands in the presence of triethanolamine (TEOA). As the relatively bulky substituents at positions 2 and 9 of R1R2p weakened the ability to coordinate to the Fe ion, the Fe ion formed TEOA complexes. The free R1R2p accepted an electron from the reduced photosensitizer through proton-coupled electron transfer (PCET) using protons of TEOA dissolved in a CH3CN solution in a CO2 atmosphere as the initial step of the catalytic cycle. Although the mixed system of the nonsubstituted 1,10-phenanthroline generates a stable tris(phenanthroline)-Fe(II) complex in solution, this complex could not function as a CO2 reduction catalyst. The mechanism in which R1R2p interacts with the Fe ion after PCET was proposed for this efficient photocatalytic CO2 reduction. The proposed photocatalytic system using the 2,9-di-sec-butyl-phenanthroline ligand could produce CO with high efficiency (quantum yield of 8.2%) combined with a dinuclear Cu(I) complex as a photosensitizer.

High performance catalyst for metal catalysis coupled with photocatalysis and its catalytic ammonia borane methanolysis for hydrogen production

In the study, the influence and mechanisms of metal and non-metal dopants on the photochemical properties of the semiconductor catalyst g-C3N4 are investigated. The results reveal that doping Ni, Ru, and B on g-C3N4 results in significant alterations to the energy band structure, the band gap value decreases to 0.78 eV (Ru@g-C3N4), 0.69 eV (Ni@g-C3N4), 0.5 eV (RuB@B-g-C3N4), and 0.1 eV (NiB@B-g-C3N4) from the original value of 1.139 eV. The doping of metal and non-metal atoms can significantly enhance the light absorption capability and photothermal conversion efficiency of B-g-C3N4. The mechanism of ammonia borane (AB) dehydrogenation follows the stepwise dehydrogenation principle. AB molecules adsorb onto the active metal centers, and with the assistance of the catalytic sites, CH3OH molecules activate and attack the B–N bond in AB molecules, leading to the initial breakage of the B–N bond, the interaction between O atoms in CH3OH and N atoms in AB continues, forming NH3BH2(OCH3). Interactions between H(B) and H(O) result in the production of H2, the energy barrier for this reaction is 34.14 kcal/mol. Compared to dark conditions, RuB@B-g-C3N4 exhibits higher catalytic activity under light irradiation, the reaction time from 9′20″ reduce to 8′. This shows that there is a synergistic effect between photocatalytic AB methanolysis and conventional metal catalyzed AB methanolysis in the RuB@B-g-C3N4 catalytic system. The study provides the novel way for the development of dual-function catalysts combining metal catalysis and photocatalysis through Ru and B modification of g-C3N4.

Single-Atomic Co-N4 Sites with CrCo Nanoparticles for Metal-Air Battery-Driven Hydrogen Evolution.

Designing highly active and robust earth abundant trifunctional electrocatalysts for energy storage and conversion applications remain an enormous challenge. Herein, we report a trifunctional electrocatalyst (CrCo/CoN4@CNT-5), synthesized at low calcination temperature (550 °C), which consists of Co-N4 single atom and CrCo alloy nanoparticles and exhibits outstanding electrocatalytic performance for the hydrogen evolution reaction, oxygen evolution reaction, and oxygen reduction reaction. The catalyst is able to deliver a current density of 10 mA cm-2 in an alkaline electrolytic cell at a very low cell voltage of ∼1.60 V. When the catalyst is equipped in a liquid rechargeable Zn-air battery, it endowed a high open-circuit voltage with excellent cycling durability and outperformed the commercial Pt/C+IrO2 catalytic system. Furthermore, the Zn-air battery powered self-driven water splitting system is displayed using CrCo/CoN4@CNT-5 as sole trifunctional catalyst, delivering a high H2 evolution rate of 168 μmol h-1. Theoretical calculations reveal synergistic interaction between Co-N4 active sites and CrCo nanoparticles, favoring the Gibbs free energy for H2 evolution. The presence of Cr not only enhances the H2O adsorption and dissociation but also tunes the electronic property of CrCo nanoparticles to provide optimized hydrogen binding capacity to Co-N4 sites, thus giving rise to accelerated H2 evolution kinetics. This work highlights the importance of the presence of small quantity of Cr in enhancing the electrocatalytic activity as well as robustness of single-atom catalyst and suggests the design of the multifunctional robust electrocatalysts for long-term H2 evolution application.

Crystal Engineering of MOF‐Derived Bimetallic Oxide Solid Solution Anchored with Au Nanoparticles for Photocatalytic CO2 Reduction to Syngas and C2 Hydrocarbons

AbstractConsidering that CO2 reduction is mostly a multielectron reaction, it is necessary for the photocatalysts to integrate multiple catalytic sites and cooperate synergistically to achieve efficient photocatalytic CO2 reduction to various products, such as C2 hydrocarbons. Herein, through crystal engineering, we designed and constructed a metal–organic framework‐derived Zr/Ti bimetallic oxide solid solution support, which was confirmed by X‐ray diffraction, electron microscopy and X‐ray absorption spectroscopy. After anchoring Au nanoparticles, the composite photocatalyst exhibited excellent performances toward photocatalytic CO2 reduction to syngas (H2 and CO production rates of 271.6 and 260.6 μmol g−1 h−1) and even C2 hydrocarbons (C2H4 and C2H6 production rates of 6.80 and 4.05 μmol g−1 h−1). According to the control experiments and theoretical calculations, the strong interaction between bimetallic oxide solid solution support and Au nanoparticles was found to be beneficial for binding intermediates and reducing CO2 reduction, highlighting the synergy effect of the catalytic system with multiple active sites.

Hydrodeoxygenation of lignin-derived phenols into cycloalkanes by atomically dispersed Pt-polyoxometalate catalysts

We report atomically dispersed Pt sites anchored on polyoxometalate cesium salts as robust and durable catalysts for upgrading lignin into hydrocarbons at relatively mild conditions. Experimental results and DFT calculations cross-validate the catalytic performance, considering the porosity, acidity, H2 storage capacity, and HOMO-LUMO energy gap of these catalysts. The optimal Pt0.4/CsPW-H2 catalyst enables the hydrodeoxygenation (HDO) of a diverse range of lignin-derived phenolics into hydrocarbons with up to 97% yield at the conditions of 150 °C and 0.1–2 MPa H2. A lignin oil from the reductive catalytic fractionation (RCF) of Eucalyptus wood can be transformed into cyclohexanes with a 32.7 wt% yield under a solvent-free condition. This catalyst demonstrates excellent reusability in the HDO of 4-propyl guaiacol for 20 cycles, achieving a 15095 molpropylcyclohexane molPt−1 total turnover number (TON). This work broadens the horizons of designing highly efficient catalytic systems aimed at sustainably producing liquid fuels from lignin.

Cobalt/Photoredox Cooperative Catalysis‐Enabled Cycloaddition Reactions of 1,6‐Diyne Derivatives

Cobalt catalysts have recently gained considerable attention as alternatives to catalysts based on precious transition metals such as Rh and Ir. Recently, Co/photoredox cooperative catalysis has emerged as a powerful tool that enables versatile transformations, including cycloaddition reactions of unsaturated compounds. In particular, 1,6‐diyne derivatives are fascinating substrates for these reactions because the corresponding exocyclic 1,3‐diene products can be further transformed into sp3‐rich carbocycles and heterocycles via functionalization of the diene moiety. The dual catalysis system can facilitate not only the cycloaddition based on the activation of the π‐bond only, such as alkyne cyclotrimerization, but also the cycloaddition involving σ‐bond activation. This Concept highlights the recent advances in Co/photoredox cooperative‐catalysis‐enabled cycloaddition reactions, focusing on the reactions of 1,6‐diyne substrates, which are difficult to perform when well‐defined cationic CoI catalysis is employed.

Three-Dimensional Electrode-Enhanced Ozone Catalytic Oxidation for Thiamethoxam Wastewater Treatment: Performance, Kinetics, and Pathway

Thiamethoxam is a second-generation neonicotinoid pesticide that is used worldwide. In this study, a three-dimensional electrode-enhanced ozone catalytic oxidation system (3DE-GAC-O3) was constructed to pretreat thiamethoxam wastewater, with granular active carbon as the particle electrode. The effects of catalytic oxidation time, current density, ozone concentration, initial thiamethoxam concentration, pH, and particle electrode dosage on thiamethoxam degradation were investigated. A response surface method based on the Box–Behnken design was employed to optimize the 3DE-GAC-O3 process. The results revealed that the 3DE-GAC-O3 system exhibited higher efficiency compared with the 3D electrode method, ozone catalytic oxidation, or 2DE-O3. The optimal operating conditions included a particle electrode dosage, ozone concentration, current density, solution pH, catalytic oxidation time, and initial thiamethoxam concentration of 18 g/dm3, 12 g/h, 25 A/m2, 7, 300 min, and 500 mg/dm3, respectively. The corresponding chemical oxygen demand removal rate reached 93.86 ± 0.95%. Thiamethoxam degradation followed a second-order reaction kinetics equation, and the rate constant decreased with increasing the initial thiamethoxam concentration. Free-radical quenching experiments indicated that both O2∙− and ∙OH were present within the 3DE-GAC-O3 system, with ∙OH being the predominant species. A GC-MS analysis revealed the formation of several intermediate products, which were characterized based on the mass fragmentation pattern. Additionally, a probable degradation pathway for thiamethoxam was proposed. Therefore, 3DE-GAC-O3 is an efficient method for the pretreatment of thiamethoxam wastewater.

Catalytic systems on a ceramic fiber carrier with deposited metals in the process of carbon monoxide oxidation

Catalytic systems on a ceramic fiber carrier with deposited metals in the process of carbon monoxide oxidation